XP 2265 PU Adhesive
Specially designed to adhere Castile Promenade Tiles to bituminous felt roofs, Sanded Asphalt and almost all other flat roof surfaces. (Please contact us if you are unsure of application).
During curing, the adhesive absorbs moisture from the atmosphere and expands providing a firm support to the tile. This results in an effective and practical fixing method which can even be used in damp and humid conditions. When cured the adhesive retains a degree of flexibility to allow for thermal and structural movement of the tiles and roof which cementitious tile adhesives do not.
PU adhesive is supplied in 1 litre bottles with nozzle. One bottle will adhere approximately 50 tiles or 5m2. The adhesive is applied by simply cutting the nozzle at the mark, which will give a 3-4mm bead, applying as per the diagram below. It is very important that the adhesive as applied as per the instructions.
Should too much adhesive be used or should it be applied too close to the edge the expanding action will force the foamed adhesive up through the gaps between tiles. Should this happen do not try to remove when wet! Leave till dry then carefully cut off with craft knife and remove marks with wire wool or similar.
Please click on the links below for the printable PU adhesive data sheet and instructions for use.
For safety precautions see container label or data sheet.
PU Adhesive Data Sheet
PU Adhesive Instructions
Castle Composites Ltd
Unit 1
Nisbet Way
Ravenstruther
Lanark
ML11 7SF
sales@castlecomposites.co.uk
Tel: 01555 870003
Fax: 01555 870040
promenade tiles promenade tiles patio tiles Rubber Playground Tiles Ladder Mats
