Promenade Tiles
Promenade Tiles can be fixed to most rubbers with PU Adhesive without any problem although some EPDM types may require some surface treatments. For advice on fixing to Rubber with PU Adhesive please call us on 01555 870003. When you are sure of the surface simply apply the tiles using our specially formulated PU Adhesive following the instructions.
Instructions for PU Adhesive are available in our technical section to download and on the label of every bottle of Castile PU Adhesive.
Undulations of up to 6mm in the EPDM can be overcome using our soft packers. Instructions for Soft Packers are also available for download.
300 x 300 Promenade Slabs
300 x 300 Promenade Slabs can be used on Rubber/ EPDM without surface treatment and this method provides an extremely quick and easy laying operation as can be seen in this example. This solution then gives the added advantage of easy removal for inspection, services, alterations and any number of other reasons for wanting to lift and relay the promenade slabs.
The 300 x 300 range is also ideal for areas where a light weight and/or low threshold level solution is required.
450 x 450 Promenade Slabs
450 x 450 Promenade Slabs can be used on Rubber/ EPDM without surface treatment and this method provides an extremely quick and easy laying operation. This solution then gives the added advantage of easy removal for inspection, services, alterations and any number of other reasons for wanting to lift and relay the promenade slabs.
The 450 x 450 range of Promenade Slabs are manufactured and tested in accordance with BS EN1339 which covers paved areas and roof coverings. This ensures consistency of product and gives confidence that the product will be strong, durable and slip resistant.
Self weight of the 450 x 450 range is 80Kg /M2 for the 38mm thick and 105Kg/M2 for the 50mm thick but at 16Kg for the 38mm thick and 21Kg for the 50mm thick they are all within the 25kg recommended lifting limit advised by the HSE.
Rubber Promenade Tiles
Rubber Promenade Tiles can be fixed to most EPDM/rubbers with XP 2435 PU Adhesive without any problem although some EPDM types may require some surface treatments. For advice on fixing to Rubber with PU Adhesive please call us on 01555 870003. When you are sure of the surface simply apply the tiles using our specially formulated XP 2435 PU Adhesive following the instructions.
As our rubber tiles are flexible they are very easy to lay and any minor undulations in the EPDM/Rubber can be taken up with the tile.
Rubber tiles must be laid with a 3mm gap between each tile and around the outside of the layout to allow for drainage and thermal expansion.
We recommend the use of our rubber tiles on low to medium trafficked areas as they do wear more than our GRC range of products.
Instructions for PU Adhesive are available online or on the label of every bottle of Castle PU Adhesive.
If you have further questions in relation to our products when used on rubber please feel free to contact us via phone or email and we will be happy to help.
Castle Composites Limited
Unit 1
Nisbet Way
Ravenstruther
LANARK, ML11 7SF
Tel: 01555-870003
Fax: 01555-870040
