Home
News
Brochures
About
Contact Us
Colour options: 4
Size: 150x600mm, 200x600mm, 300x600mm, 400x600mm
Thickness: 20mm
Castle porcelain coping stones are manufactured from high-quality materials and designed to be used on top of walls, piers, and masonry.
As porcelain is a virtually non-porous material, they are ideally suited to use on a wall, as they keep water ingress to a minimum.
The non-porous nature of porcelain also helps prevent staining, meaning the coping will keep its original colour and be low maintenance throughout its lifetime.
Our porcelain copes are fully tested for frost resistance, water absorption, chemical resistance, and stain resistance.
Drip checks are engineered into both sides of the coping stones 20mm from the edge. These drip checks prevent water from running under the coping stone and onto the face of the wall.
Our porcelain coping stones are surprisingly cost-effective, so please contact us for more pricing information.
Free samples are available upon request to confirm colour and suitability
Thickness: 20mm
Width: 150mm, 200mm, 300mm, 400mm
Length 600mm
Drip Checks: Both sides 20mm from edges
Weight: 200mm = 5.4kg each
300mm = 8kg each
400mm = 10.7kg each
Important Notes
As the rounded edge of the coping is created by hand after the porcelain has been manufactured, there may be a slight curing line on one side of the cope. Please take this into consideration when installing so they match as well as possible.
Porcelain coping stones must be installed with an SBR bond bridge (primer) when laying in mortar. Please see the laying guide for more information.
Porcelain coping stones are suitable for use with our coping stone adhesive as well as traditional mortar.
Pointing can be completed with mortar and external-grade grout.
