2265 PU Adhesive

GRC Promenade Tiles

Size: 1 litre

Adhere 50 tiles or 5m2 approx

Specially designed to adhere Castile Promenade Tiles to bituminous felt roofs, Sanded Asphalt and almost all other flat roof surfaces.

During curing, the adhesive absorbs moisture from the atmosphere and expands providing a firm support to the tile. This results in an effective and practical fixing method which can even be used in damp and humid conditions. When cured the adhesive retains a degree of flexibility to allow for thermal and structural movement of the tiles and roof which cementitious tile adhesives do not.

PU adhesive is supplied in 1 litre bottles with nozzle. One bottle will adhere approximately 50 tiles or 5m2. The adhesive is applied by simply cutting the nozzle at the mark, which will give a 3-4mm bead, applying as per the diagram below. It is very important that the adhesive as applied as per the instructions.

Should too much adhesive be used or should it be applied too close to the edge the expanding action will force the foamed adhesive up through the gaps between tiles. Should this happen do not try to remove when wet! Leave till dry then carefully cut off with craft knife and remove marks with wire wool or similar.

2265 PU Adhesive

Castle 2265 PU Adhesive has been specially formulated to bond grc promenade tiles wo waterproofing on flat roofs, balconies, walkways and terraces.

This Poly Urethane adhesive is solvent and filler free and accepted by most waterproofing manufacturers (check with yours to be sure). We have been supplying 2265 PU adhesive for this purpose since 1996 to many happy customers.

Please ensure that the instruction for use are always follow when installing tiles with PU adhesive. Each bottle has instruction on the label and the guide can also be downloaded.

Always follow the precautions prescribed in the data sheet in relation to PPE.

2265PU Adhesive can be used to bond to:
-EPDM rubber
-Bituminous Felt
-Asphalt
-Fibre Glass
-Single Ply
-Liquid Coatings
-Concrete
-Timber

© 2018 Castle Composites Ltd | Privacy